Když to není vada nabíječky jde o to kdy a jak tlačítka INC a DEC mačkáš - pouštíš. (swap=switch =přepínání)
Charging NiCd/NiMH battery in the charge modeThis program charge the battery using the current you set up. In the “auto” state, you should set
up the upper limit of the charge current to avoid damage by excessive feeding current. Some
batteries of low resistance and capacity can lead to higher current in the “auto” charging mode.
But in the manual mode, it will charge with the current you set. You can make it blink in the current
field and press INC and DEC simultaneously to swap between Auto and Manual Mode.
NOTE: Allowable fast charge current: 1C-2C (str. 23 manuálu Jiné manuály kapitola Char-Nixx různé strany)
https://www.pololu.com/file/0J525/iMAXB6ACmanual.pdfChce to trochu cviku, aby jsi obě tlačítka INC a DEC stiskl opravdu současně.
So try a couple of times to hit the two buttons at EXACTLY the same time, and HOLD THEM BOTH DOWN
until the display changes. When that happens, release them quickly (if you keep holding them down,
the display will slowly alternate between manual and automatic mode).
Changing from Manual to Automatic mode (Imax B6, Bantham B6)https://www.rcgroups.com/forums/showthread.php?1053937-Changing-from-Manual-to-Automatic-mode-%28Imax-B6-Bantham-B6%29